Tamara Bonet Sculpture, Bronze and Ceramic Figurative Art
Bronze, Ceramic, About, and Contact

Garden Reverie Sculpture #11

Garden Reverie Sculpture #11

The last step before molding is sculpting the base with flowers and note.   (See finished clay pics and promotion and bronze photos).

First off, to determine the right size of base, I cut out a circle in paper and carefully placed my lady on it.  I wanted it to be as small as possible so that she wouldn’t look bottom heavy. Also, the smaller the base, the taller the sculpture will look.

Next, I needed to put the edition number, my signature and copyright between the chair legs, so I sketched these details on the paper to see what size they should be.

Cut paper circle to see how big I wanted the base.

Cut paper circle to see how big I wanted the base.

Then I rolled out some clay to a uniform depth of about 3/8,” remembering that it shrinks because it’s water based clay. Using a rolling pin and a couple of porcelain tiles, I rolled the clay in between to an even depth.  Then I cut the clay circle out a little wider than the paper circle to allow for shrinkage.

Cut out the clay circle out of the rolled out clay.

Cut out the clay circle out of the rolled out clay.

A thin film of plastic wrap works great for signing my name and then poking my signature through the plastic.  Then I connect the dots and have the signature right the first time.

My signature is poked through the plastic with little pinholes.

My signature is poked through the plastic with little pinholes.

Getting a feel for how big the note should be . . .

Deciding how big I want the note to be and where to position it.

Deciding how big I want the note to be and where to position it.

I wanted a small bouquet of flowers to add to the story line for her.  She may have picked them herself and then wrote the poem while relaxing in the garden, or perhaps she was given the note and flowers. Let the viewer decide.  Laying a few rolls of clay helped me see how big the flowers should be. It looked good having the flower stems over the edge of the note, with flowers extending past the chair leg.

Trying out a little bit of mockup flowers on the edge of the note.

Trying out a little bit of mockup flowers on the edge of the note.

The goal was to give some life to the paper, rather than flat on the ground.  One edge curling and a few waves in the paper helped.  I had to pack clay underneath the edges to help with de-molding during casting. Deep undercuts are not good for a mold, because the rubber will get stuck.

Could only fit a few words on the clay paper note.

Could only fit a few words on the clay paper note.

The note could only contain a few words because it’s so small, so I wrote it out on plastic wrap, and then free hand wrote it into clay with a sharp pencil.

Decided to freehand write the note rather than poke pinholes through a pre-written note on plastic.

Decided to freehand write the note rather than poke pinholes through a pre-written note on plastic.

Clay note with poetry from a song my dear friend wrote.

Clay note with poetry from a song my dear friend wrote.

Incidentally, a dear friend of mine wrote the words included on the note. It’s a portion of a song she wrote, and sang with her soprano voice and accompanied by her guitar many years ago.  I love that song very much and it brings back great memories of when my mom and I sang the song, harmonizing with her. She gave me permission to include a portion of the song for this sculpture.  A bit of her art combined with mine is special sentiment. I thought that the words could have a lot of different meanings, like poetry often does.

A garden rose and wild flowers bouquet is loosely wrapped in a string ribbon.

"Look into the window of my heart, this is what you'll find".... Has special meaning for me.

“Look into the window of my heart, this is what you’ll find”…. Has special meaning for me.

Well, that is the conclusion of the sculpting portion of this work in progress of Garden Reverie.

Next I will begin applying rubber to the sculpture.

Thanks for following along!

~Tamara

 

 

4 Responses to “Garden Reverie Sculpture #11”

  1. Bill Brooks says:

    Great technique for getting the signature and note written… I’ll have to try that sometime… :) Doing my own piece has been a real eye opener into the effort that goes into a bronze sculpture… what an adventure… I love your work… narrative, beauty, emotion and movement seem to be the things that inspire me to sculpt… your work is a constant inspiration… :)

  2. Tamara Bonet says:

    Glad the post was helpful and thanks so much for commenting!

  3. El detalle de la escritura en la arcilla, GRACIAS!!
    Me encantan tus esculturas. Una maravilla!!

  4. Tamara Bonet says:

    Thank you Ana! Yes, writing on the clay is fun. I like how the clay is so expressive when the sharp point pulls through it. It looks pretty to me and the shadows of the writing etched in is nice naturally as it is with no patina or glazing. :-)

Leave a Reply

tamarabonet.comHelp Stop Art Fraud
Email: tamarasculpture@sbcglobal.net
Bronze Gallery Ceramic Gallery About Tamara Bonêt Contact Tamara Bonêt Help Stop Art Fraud